Introducción
This is a back Glass replacement for the Xiaomi Redmi 10
Qué necesitas
-
-
Place tape on the back glass lenz
-
use a heat gun to heat up the adhesive around the glass
-
-
-
With a razor blade and a pry card work around the edges of the glass carefully
-
take the camera glass off
-
-
-
-
Clean the left over adhesive of the camera frame
-
Place New adhesive all over the edges of the camera frame
-
-
-
Place the new camera glass on top of the camera frame and gently press on the glass
-
Clean any left over adhesive
-
You are good to go!
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
4 personas más completaron esta guía.