Repara tus cosas Comunidad Tienda

Xiaomi ROBOROCK S5 Omnidirectional Wheel Assembly Replacement

Introducción

This guide will go over the steps necessary to replace the omnidirectional wheel assembly at the front of the Roborock S5. Replacing this wheel assembly is sometimes necessary when there is an excess buildup of dirt, hair, and other fibrous debris that interferes with the wheel's ability to spin freely. In other cases, the wheel assembly can become damaged and need to be replaced entirely.

Before you begin the repair, make sure to turn off the device.

Qué necesitas

  1. Xiaomi ROBOROCK S5 Omnidirectional Wheel Assembly Replacement, Omnidirectional Wheel Assembly: paso 1, imagen 1 de 3 Xiaomi ROBOROCK S5 Omnidirectional Wheel Assembly Replacement, Omnidirectional Wheel Assembly: paso 1, imagen 2 de 3 Xiaomi ROBOROCK S5 Omnidirectional Wheel Assembly Replacement, Omnidirectional Wheel Assembly: paso 1, imagen 3 de 3

    • Power down your Roborock S5 vacuum.

    • Place it upside down with the omnidirectional wheel facing you.

    • Grab the wheel with your thumb and index finger and pull up.

    • The wheel assembly should pop out fairly easily and without too much force.

    • Remove any debris before replacing the wheel.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 12

Ultimos 30 días: 67

Todo El Tiempo: 347