Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Xiaomi Mi 4 Rear Case/Midframe Replacement

Qué necesitas

  1. Xiaomi Mi 4 Rear Case/Midframe Replacement, Rear Case/Midframe: paso 1, imagen 1 de 3 Xiaomi Mi 4 Rear Case/Midframe Replacement, Rear Case/Midframe: paso 1, imagen 2 de 3 Xiaomi Mi 4 Rear Case/Midframe Replacement, Rear Case/Midframe: paso 1, imagen 3 de 3
    • Check to make sure that the device is powered off.

    • Use a pin or paper clip to insert in the hole on the side of the phone next to the micro SIM cardholder to remove the tray.

    • Remove the SIM card tray from the Xiaomi Mi 4 and store it somewhere safe.

  2. Xiaomi Mi 4 Rear Case/Midframe Replacement: paso 2, imagen 1 de 3 Xiaomi Mi 4 Rear Case/Midframe Replacement: paso 2, imagen 2 de 3 Xiaomi Mi 4 Rear Case/Midframe Replacement: paso 2, imagen 3 de 3
    Herramienta utilizada en este paso:
    Metal Spudger
    $2.99
    Comprar
    • Using the flat metal spudger and curved metal spudger, make a wedge between the plastic back cover and the inner frame

    • Using the second spudger, slowly work your way around the perimeter of the device

    • Listen for clicking sounds as you are prying the back cover away from the frame

    • As the back cover is almost completely removed, use the suction-cup tool to remove the plastic cover without damaging the back

  3. Xiaomi Mi 4 Rear Case/Midframe Replacement: paso 3, imagen 1 de 3 Xiaomi Mi 4 Rear Case/Midframe Replacement: paso 3, imagen 2 de 3 Xiaomi Mi 4 Rear Case/Midframe Replacement: paso 3, imagen 3 de 3
    • Use a 000 phillips head screwdriver to remove the 10 1.2mm phillips head screws in the plastic frame that hold the motherboard and battery.

    • Use a 000 phillips head screwdriver to remove the 3 0.5mm phillips head screws in the plastic frame that hold the motherboard and battery.

    • Use the small plastic opening tool and place it in the slot on the bottom right corner of the inner frame and carefully pry it off.

Conclusión

To reassemble your device, follow these instructions in reverse order.

9 personas más completaron esta guía.

Robert Cobaich

Miembro Desde 09/03/15

2,073 Reputación

3 Guías creadas

Equipo

USF Tampa, Team 16-1, Blackwell Winter 2016 Miembro de USF Tampa, Team 16-1, Blackwell Winter 2016

USFT-BLACKWELL-W16S16G1

4 Miembros

11 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 10

Todo El Tiempo: 4,254