Saltar al contenido principal

Xiaomi Air 12 Speaker Replacement

Qué necesitas

  1. Xiaomi Air 12 Speaker Replacement, Rear Casing: paso 1, imagen 1 de 1
    • Orient the computer so the Xiaomi logo is at the bottom of the device.

  2. Xiaomi Air 12 Speaker Replacement: paso 2, imagen 1 de 3 Xiaomi Air 12 Speaker Replacement: paso 2, imagen 2 de 3 Xiaomi Air 12 Speaker Replacement: paso 2, imagen 3 de 3
    • Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.

  3. Xiaomi Air 12 Speaker Replacement: paso 3, imagen 1 de 2 Xiaomi Air 12 Speaker Replacement: paso 3, imagen 2 de 2
    • Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise.

  4. Xiaomi Air 12 Speaker Replacement: paso 4, imagen 1 de 3 Xiaomi Air 12 Speaker Replacement: paso 4, imagen 2 de 3 Xiaomi Air 12 Speaker Replacement: paso 4, imagen 3 de 3
    • Insert the plastic opening tool into each side of the computer and push the tool downwards to pop open the back cover.

    • You will hear popping noises as you remove the cover.

  5. Xiaomi Air 12 Speaker Replacement: paso 5, imagen 1 de 2 Xiaomi Air 12 Speaker Replacement: paso 5, imagen 2 de 2
    • Remove the back of the laptop by gently lifting the casing upwards.

  6. Xiaomi Air 12 Speaker Replacement, Speaker: paso 6, imagen 1 de 2 Xiaomi Air 12 Speaker Replacement, Speaker: paso 6, imagen 2 de 2
    • Remove the white and black speaker wires from the black tabs by pulling upwards from the device.

  7. Xiaomi Air 12 Speaker Replacement: paso 7, imagen 1 de 2 Xiaomi Air 12 Speaker Replacement: paso 7, imagen 2 de 2
    • Gently pull the speaker connector out from the connection point using your hand.

  8. Xiaomi Air 12 Speaker Replacement: paso 8, imagen 1 de 3 Xiaomi Air 12 Speaker Replacement: paso 8, imagen 2 de 3 Xiaomi Air 12 Speaker Replacement: paso 8, imagen 3 de 3
    • Remove the left speaker module by pulling the panel up from the device.

    • Repeat the same process for the right speaker module.

    • Left and Right speaker modules are denoted by an "L" and "R" respectively.

    • There will be a slight adhesive underneath the module.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Hannah Kwan

Miembro Desde 04/18/18

824 Reputación

5 Guías creadas

Equipo

Cal Poly, Team S18-G4, Livingston Spring 2018 Miembro de Cal Poly, Team S18-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G4

4 Miembros

20 Guías creadas

6 comentarios

Thanks for the tutorial! But where can i buy replacement speakers? My right speaker is overdriving all the time now, giving me a lot of loud buzz noises.

Nicolai - Contestar

The same for me. I’d like to replace the speakers because one of them is “crackling/vibrating”, but i don’t know where to buy them…

Maniac 45 - Contestar

same problem, mine at >50% vibrating very bad

isman87 - Contestar

have you found them? i need those too

Giorgio Pianesi -

Hello, i love this laptop and its been my companion for almost 3 years think the audio input jack got grounded because i heard a creaking sound when i inserted a metallic headset jack, the device was charging when it happened. Now the audio output from the audio jack port is like a minus one or somewhat instrumental. Any suggestions what to do?

James Prae Liclican - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 14

Todo El Tiempo: 1,017