Saltar al contenido principal

Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement

Qué necesitas

  1. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement, Bumper: paso 1, imagen 1 de 1
    • Remove the battery cover.

    • Remove batteries.

  2. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 2, imagen 1 de 3 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 2, imagen 2 de 3 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 2, imagen 3 de 3
    • Grip the controller firmly to remove the side handle cover.

    • Use a flathead screwdriver or a spudger to wedge between the seams of the front to the side handle of the controller.

    • Move the flathead screwdriver all the way around the side plates seam and push the plate forward.

  3. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 3, imagen 1 de 2 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 3, imagen 2 de 2
    • Use a screwdriver and punch a hole directly in the center label. There you will find a hidden screw.

    • Remove the five 10mm screws located on the back of the controller using a T8 screwdriver.

  4. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 4, imagen 1 de 2 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 4, imagen 2 de 2
    • Remove the backplate.

    Comment je galère de ouf pour remettre la coque arrière. J'arrive plus aligner la prise Jack ?

    nawack de Marseille - Contestar

  5. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 5, imagen 1 de 2 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 5, imagen 2 de 2
    • Remove the faceplate.

  6. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 6, imagen 1 de 3 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 6, imagen 2 de 3 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 6, imagen 3 de 3
    • Remove the cover piece surrounding the Xbox button off of its pegs.

    • Firmly hold controller and push cover piece up from the pegs.

    • Press the Xbox button down to assist in the unclipping of the piece.

  7. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 7, imagen 1 de 2 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 7, imagen 2 de 2
    • Remove the broken bumper by unclipping it from its pegs.

    • Hold the controller firmly and push the bumper piece up from its pegs to unclip.

  8. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 8, imagen 1 de 3 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 8, imagen 2 de 3 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: paso 8, imagen 3 de 3
    • Align the replacement bumper onto the pegs, push gently and click into place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

19 personas más completaron esta guía.

2 comentarios

On my controller the screws were T8 security type, so you'll need bits with a hole in the middle

Sean H - Contestar

Is there a way to do this without removing all of the front and grip.

Alan Marantos - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 21

Ultimos 7 días: 151

Ultimos 30 días: 668

Todo El Tiempo: 47,055