Repara tus cosas

Derecho a reparar

Tienda

Xbox One S WiFi Card Replacement

Escrito Por: Victoria Law (y 5 de otros participantes)
  • Comentarios: 12
  • Favoritos: 0
  • Terminaciones: 15

Dificultad

Moderado

Pasos

8

Tiempo Requerido

5 minutos

Secciones

2

Banderas

1

Needs More Images

Necesita más imágenes

Unas imágenes más harían que los procedimientos de esta guía sean claros.

Introducción

So you've confirmed your Xbox One S cannot connect to any Wi-Fi sources, but other devices can. Follow these steps to replace the Wi-Fi card.

  1. Flip the Xbox One S so that the bottom of the case is facing upward.

    • Flip the Xbox One S so that the bottom of the case is facing upward.

    Traducir

  2. Insert the plastic opening tool into the gap between the bottom of the case and the grated top side. Then find the clips in between that hold the case in place.

    • Insert the plastic opening tool into the gap between the bottom of the case and the grated top side. Then find the clips in between that hold the case in place.

    • Use the opening tool to pop the clips out. The best method is to pry the black case away from the bottom.

    • You will hear clicking sounds when you are prying the case open. It may be fairly difficult to remove the bottom.

    • It's possible that the clips may break when you remove the bottom from the case.

    • We recommend starting at one corner and sliding the prying tool along the edges of the Xbox One S. Once the first few clips are opened you can lift the cover up to find the remaining clips.

    Traducir

  3. Once all of the clips are opened, remove the bottom part of the case.

    • Once all of the clips are opened, remove the bottom part of the case.

    Traducir

  4. El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora

    El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora

  5. Find all of the green screws on the metal case labeled F1 through F6. Take the T10 Torx screwdriver and remove the six 50 mm long screws.

    • Find all of the green screws on the metal case labeled F1 through F6.

    • Take the T10 Torx screwdriver and remove the six 50 mm long screws.

    Traducir

  6. Insert a pry tool gently between the top cover and metal casing on both sides to prepare the cover for removal. This step is necessary because you need to pry interior rivets away from the exterior case. The interior rivets that that hold the case in place are circled in the last image. After you gently pry in the areas demonstrated, the side panel of the exterior case will be able to come off of the rest of the casing. Look at the image in Step 7 for clarification on how the exterior case disassembles.

    • Insert a pry tool gently between the top cover and metal casing on both sides to prepare the cover for removal.

    • This step is necessary because you need to pry interior rivets away from the exterior case. The interior rivets that that hold the case in place are circled in the last image. After you gently pry in the areas demonstrated, the side panel of the exterior case will be able to come off of the rest of the casing.

    • Look at the image in Step 7 for clarification on how the exterior case disassembles.

    Traducir

  7. Gently separate the interior case from the white exterior case using the appropriate method. Gently separate the interior case from the white exterior case using the appropriate method.

    • Gently separate the interior case from the white exterior case using the appropriate method.

    Traducir

  8. Search the sides of the interior case for the Wi-Fi card. It should be across from the hard drive.

    • Search the sides of the interior case for the Wi-Fi card. It should be across from the hard drive.

    Traducir

  9. Remove the black T8 screws with orange circles around them (there should be 3 of them).

    • Remove the black T8 screws with orange circles around them (there should be 3 of them).

    • After removing the screws, gently detach the Wi-Fi card.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

15 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Victoria Law

Miembro Desde 26/04/17

721 Reputación

3 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

Cal Poly, Team S22-G3, Livingston Spring 2017 Miembro de Cal Poly, Team S22-G3, Livingston Spring 2017

CPSU-LIVINGSTON-S17S22G3

4 Miembros

33 Guías creadas

3 comentarios

Agregar un comentario

The T10 is too small for the WiFi card what should I use

Joe Smith - Contestar

T8 Torx Bit Screwdriver

Sebastian Rosso -

How long are the 15 mm screws supposed to be?

Natalie G - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 20

Ultimos 7 días: 62

Ultimos 30 días: 326

Todo El Tiempo: 9,932