Saltar al contenido principal

Xbox One Optical Drive Laser Replacement

Qué necesitas

  1. Xbox One Optical Drive Laser Replacement, Optical Drive Case Screws: paso 1, imagen 1 de 1
    • Make sure the optical drive is not connected to any power source and is powered off.

    • Unscrew the four Phillips #1 screws on the top of the optical drive.

  2. Xbox One Optical Drive Laser Replacement, Optical Drive Case Lid: paso 2, imagen 1 de 1
    • Lift the lid off of the optical drive case, this should require little to no force.

  3. Xbox One Optical Drive Laser Replacement, Optical Drive Case: paso 3, imagen 1 de 2 Xbox One Optical Drive Laser Replacement, Optical Drive Case: paso 3, imagen 2 de 2
    • Slide the remaining optical drive case off of the internal components.

    • Internal components often snag on these points when removing the optical drive case.

  4. Xbox One Optical Drive Laser Replacement, ZIF Connectors: paso 4, imagen 1 de 2 Xbox One Optical Drive Laser Replacement, ZIF Connectors: paso 4, imagen 2 de 2
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar
    • Locate the three ZIF connectors on the optical drive PCB.

    • Using tweezers, gently lift the tab on each ZIF connector to release the ribbon cables.

    • Remove the ribbon cable from each ZIF connector.

  5. Xbox One Optical Drive Laser Replacement, PCB Screws: paso 5, imagen 1 de 1
    • Unscrew the three Phillips #0 screws mounting the PCB.

  6. Xbox One Optical Drive Laser Replacement, Moving the PCB: paso 6, imagen 1 de 1
    • Gently lift the PCB and place it to the side.

    • When lifting the PCB, be careful to not detach the wires connecting the PCB to the motor.

  7. Xbox One Optical Drive Laser Replacement, Optical Drive Laser Screws: paso 7, imagen 1 de 1
    • Unscrew the three Phillips #0 screws mounting the optical drive laser.

  8. Xbox One Optical Drive Laser Replacement, Optical Drive Laser: paso 8, imagen 1 de 1
    • Lift the old optical drive laser from the unit and place in the new optical drive laser.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 30

Ultimos 30 días: 169

Todo El Tiempo: 4,365