Repara tus cosas Comunidad Tienda

Xbox One Elite Controller (Model 1698) Motherboard Replacement

Qué necesitas

  1. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Show me the Screws!: paso 1, imagen 1 de 2 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Show me the Screws!: paso 1, imagen 2 de 2

    • You can remove the side panels with a pry tool.

    • You don't need to remove the rubber. The rubber on this controller was already bad

    Editar

  2. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Removing the back panel screws: paso 2, imagen 1 de 1

    • Remove the 5 Torx Security Bit (TR9) screws

    Editar

  3. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Popping that back panel off: paso 3, imagen 1 de 3 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Popping that back panel off: paso 3, imagen 2 de 3 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Popping that back panel off: paso 3, imagen 3 de 3

    • Pry the panel next to the 3.5mm port

    • Be careful to not rip the ribbon shown in the next step

    Editar

  5. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Warning Carefully remove the ribbon: paso 4, imagen 1 de 2 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Warning Carefully remove the ribbon: paso 4, imagen 2 de 2

    • Be careful to not rip the ribbon cable

    • You can pop the connector up to remove the ribbon easily

    • Ribbon Cable

    Editar

  6. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Screws on controller motherboard: paso 5, imagen 1 de 1

    • Remove the 2 Torx (T6) screws

    Editar

  7. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Desolder wires from motherboard: paso 6, imagen 1 de 2 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Desolder wires from motherboard: paso 6, imagen 2 de 2

    • Desolder the 4 wires on each side, these control the vibrations and the RT LT

    Editar

  8. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Remove the motherboard: paso 7, imagen 1 de 2 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Remove the motherboard: paso 7, imagen 2 de 2

    • Pull up from the "top" side of the controller on the sister board.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

9 personas más completaron esta guía.

Autor

con 3 otros colaboradores

EasyAsABC123

Miembro Desde 01/22/10

2,407 Reputación

5 Guías creadas

Insignias: 25

+ 22 más insignias

Un comentario

50 minutes? half of that tops

glenn.fowell - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 33

Ultimos 30 días: 93

Todo El Tiempo: 16,524