Saltar al contenido principal

Xbox One Elite Controller (Model 1698) Daughterboard Replacement

Qué necesitas

  1. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Show me the Screws!: paso 1, imagen 1 de 2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Show me the Screws!: paso 1, imagen 2 de 2
    • You can remove the side panels with a pry tool.

    • You don't need to remove the rubber. The rubber on this controller was already bad

  2. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Removing the back panel screws: paso 2, imagen 1 de 1
    • Remove the 5 Torx Security Bit (TR9) screws

  3. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Popping that back panel off: paso 3, imagen 1 de 3 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Popping that back panel off: paso 3, imagen 2 de 3 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Popping that back panel off: paso 3, imagen 3 de 3
    • Pry the panel next to the 3.5mm port

    • Be careful to not rip the ribbon shown in the next step

  4. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Warning Carefully remove the ribbon: paso 4, imagen 1 de 2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Warning Carefully remove the ribbon: paso 4, imagen 2 de 2
    • Be careful to not rip the ribbon cable

    • You can pop the connector up to remove the ribbon easily

    • Ribbon Cable

  5. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Screws on controller motherboard: paso 5, imagen 1 de 1
    • Remove the 2 Torx (T6) screws

  6. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Desolder wires from motherboard: paso 6, imagen 1 de 2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Desolder wires from motherboard: paso 6, imagen 2 de 2
    • Desolder the 4 wires on each side, these control the vibrations and the RT LT

  7. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the motherboard: paso 7, imagen 1 de 2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the motherboard: paso 7, imagen 2 de 2
    • Pull up from the "top" side of the controller on the sister board.

  8. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the Home Button Cover: paso 8, imagen 1 de 3 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the Home Button Cover: paso 8, imagen 2 de 3 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the Home Button Cover: paso 8, imagen 3 de 3
    • Be Careful to not lose the sync button

    • Pry the middle section up from the home button side.

    • This will also remove the LB and RB which is a single part

  9. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the controller daughterboard: paso 9, imagen 1 de 2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the controller daughterboard: paso 9, imagen 2 de 2
    • Unscrew the 6 Torx (T6) screws

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

EasyAsABC123

Miembro Desde 01/22/10

2,407 Reputación

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 16

Ultimos 30 días: 59

Todo El Tiempo: 8,193