Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Xbox 360 Faceplate Replacement

Qué necesitas

  1. Xbox 360 Faceplate Replacement, Faceplate: paso 1, imagen 1 de 3 Xbox 360 Faceplate Replacement, Faceplate: paso 1, imagen 2 de 3 Xbox 360 Faceplate Replacement, Faceplate: paso 1, imagen 3 de 3
    • Orient the console horizontally with the I/O ports side down.

    • Insert the edge of a spudger between the faceplate and the outer casing near the power button.

    • Run your spudger along the edge of the faceplate to release the clips securing it to the front of the Xbox.

    • Remove the faceplate from the front face of the console.

Conclusión

To reassemble your device, follow these instructions in reverse order.

84 personas más completaron esta guía.

2 comentarios

Ok so my drive wasn't opening and i eventually came to the conclusion the drive was bad but i was wrong while replacing the drive the original one was plugged into the computer to obtain the drive key and it opened and closed fine, the problem is the case ...when i have the drive plugged into the xbox and tge actual xbox case is off it works once i put the case on it squishes the drive and it won't open, nothing appears wrong with any component. Help from anyone is appreciated

Societyburning - Contestar

You don’t have to have tools for this.

brockchristian93 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 28

Ultimos 30 días: 164

Todo El Tiempo: 28,671