Repara tus cosas Comunidad Tienda

Wyze WVCR200s Rotating Brush Replacement

Introducción

Follow this guide to replace the rotating brush from your Wyze WVCR200s robot vacuum. The rotating brush is a part of the vacuum that will need to be taken out to be cleaned regularly.

  1. Wyze WVCR200s Rotating Brush Replacement, Rotating Brush: paso 1, imagen 1 de 1

    • Flip the vacuum upside down so the bottom is facing up.

    • In the center of the device, you should see the rotating brush that stretches from one wheel to the other.

    Editar

  3. Wyze WVCR200s Rotating Brush Replacement: paso 2, imagen 1 de 2 Wyze WVCR200s Rotating Brush Replacement: paso 2, imagen 2 de 2

    • Pinch the blue tabs below the rotating brush towards each other.

    • Lift the plastic housing surrounding the rotating brushing straight up, and the remove it from the vacuum.

    Editar

  4. Wyze WVCR200s Rotating Brush Replacement: paso 3, imagen 1 de 3 Wyze WVCR200s Rotating Brush Replacement: paso 3, imagen 2 de 3 Wyze WVCR200s Rotating Brush Replacement: paso 3, imagen 3 de 3

    • To remove the rotating brush, lift one end of the brush upwards, and remove.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Brendan

Miembro Desde 03/20/23

181 Reputación

2 Guías creadas

Insignias: 2

Equipo

UMass Dartmouth, Team 5-5, Ramos Spring 2023 Miembro de UMass Dartmouth, Team 5-5, Ramos Spring 2023

UMASSD-RAMOS-S23S5G5

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 166