Saltar al contenido principal

WowWee MiP Robot Tire Replacement

Qué necesitas

  1. WowWee MiP Robot Tire Replacement, Wheel: paso 1, imagen 1 de 2 WowWee MiP Robot Tire Replacement, Wheel: paso 1, imagen 2 de 2
    • Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.

    • This plastic material is not replaceable. Any damage will be noticeable.

  2. WowWee MiP Robot Tire Replacement: paso 2, imagen 1 de 2 WowWee MiP Robot Tire Replacement: paso 2, imagen 2 de 2
    • Remove the 12.0 mm Phillips #2 screw.

    • Hold the wheel in place, or it will rotate as you attempt to remove the screw.

  3. WowWee MiP Robot Tire Replacement: paso 3, imagen 1 de 1
    • Pull the wheel off of the square axle.

    • Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

  4. WowWee MiP Robot Tire Replacement, Tires: paso 4, imagen 1 de 2 WowWee MiP Robot Tire Replacement, Tires: paso 4, imagen 2 de 2
    • Remove the three 7.7 mm Phillips #1 screws.

  5. WowWee MiP Robot Tire Replacement: paso 5, imagen 1 de 3 WowWee MiP Robot Tire Replacement: paso 5, imagen 2 de 3 WowWee MiP Robot Tire Replacement: paso 5, imagen 3 de 3
    • Separate the rubber tire from the rim.

    • Push the collar out to separate the plastic layers of the wheel.

    • When reassembling, align the groove and the key of the two wheels' halves together.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Moira Keahon

Miembro Desde 09/24/14

257 Reputación

3 Guías creadas

Equipo

Un comentario

my MiP has plastic over his wheels

Clarrie O'HARE - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 9

Todo El Tiempo: 6,030