Repara tus cosas Comunidad Tienda

WowWee MiP Robot Power Switch Replacement

Introducción

The power switch turns the MiP on or off. If it's malfunctioning the robot will not work.

Qué necesitas

  1. WowWee MiP Robot Power Switch Replacement, Battery: paso 1, imagen 1 de 2 WowWee MiP Robot Power Switch Replacement, Battery: paso 1, imagen 2 de 2

    • Remove the three 12.0 mm Phillips # 2 screws from the battery cover.

    Editar

  2. WowWee MiP Robot Power Switch Replacement: paso 2, imagen 1 de 2 WowWee MiP Robot Power Switch Replacement: paso 2, imagen 2 de 2

    • Carefully pull the battery pack from the robot.

    • Remove the batteries from the battery pack.

    Editar

  3. WowWee MiP Robot Power Switch Replacement, Wheel: paso 3, imagen 1 de 2 WowWee MiP Robot Power Switch Replacement, Wheel: paso 3, imagen 2 de 2

    • Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.

    • This plastic material is not replaceable. Any damage will be noticeable.

    Editar

  4. WowWee MiP Robot Power Switch Replacement: paso 4, imagen 1 de 2 WowWee MiP Robot Power Switch Replacement: paso 4, imagen 2 de 2

    • Remove the 12.0 mm Phillips #2 screw.

    • Hold the wheel in place, or it will rotate as you attempt to remove the screw.

    Editar

  6. WowWee MiP Robot Power Switch Replacement: paso 5, imagen 1 de 1

    • Pull the wheel off of the square axle.

    • Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

    Editar

  7. WowWee MiP Robot Power Switch Replacement, WowWee MiP Robot Body Disassembly: paso 6, imagen 1 de 2 WowWee MiP Robot Power Switch Replacement, WowWee MiP Robot Body Disassembly: paso 6, imagen 2 de 2

    • Remove the eight 9.3 mm Phillips #1 screws from the back of the robot.

    Editar

  8. WowWee MiP Robot Power Switch Replacement: paso 7, imagen 1 de 3 WowWee MiP Robot Power Switch Replacement: paso 7, imagen 2 de 3 WowWee MiP Robot Power Switch Replacement: paso 7, imagen 3 de 3

    • Remove the arms from the body.

    • Carefully open the body compartment.

    • Open the compartment slowly. There are wires connecting the two body pieces together. If pulled too hard, the wires and/or the motherboard could be damaged.

    Editar

  9. WowWee MiP Robot Power Switch Replacement: paso 8, imagen 1 de 1

    • Using precision tweezers, disconnect the following three bundles of wires:

    • Connecting the battery pack to the motherboard.

    • Connecting the power switch to the motherboard.

    • Connecting the speaker to the motherboard.

    Editar

  10. WowWee MiP Robot Power Switch Replacement, Power Switch: paso 9, imagen 1 de 2 WowWee MiP Robot Power Switch Replacement, Power Switch: paso 9, imagen 2 de 2

    • Remove the two 9.3mm Phillips #1 screws.

    Editar

  11. WowWee MiP Robot Power Switch Replacement: paso 10, imagen 1 de 1

    • Remove the power switch assembly from the body by gently pulling straight out on the wires.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Daniel Burkholder

Miembro Desde 02/16/16

623 Reputación

4 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

USF Tampa, Team 3-4, Wollert Spring 2016 Miembro de USF Tampa, Team 3-4, Wollert Spring 2016

USFT-WOLLERT-S16S3G4

4 Miembros

10 Guías creadas

Un comentario

where can i buy the power switch of MiP

Reinejoe Cacho - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 604