Repara tus cosas Comunidad Tienda

WowWee MiP Robot Battery Replacement

Introducción

The WowWee MiP robot has a tendency towards short battery life. If the MiP seems too slow or stops responding, use this guide to change the MiP’s batteries. The MiP’s batteries are located in a battery pack on the robot's back.

Qué necesitas

  1. WowWee MiP Robot Battery Replacement, Battery: paso 1, imagen 1 de 2 WowWee MiP Robot Battery Replacement, Battery: paso 1, imagen 2 de 2

    • Remove the three 12.0 mm Phillips # 2 screws from the battery cover.

    Editar

  3. WowWee MiP Robot Battery Replacement: paso 2, imagen 1 de 2 WowWee MiP Robot Battery Replacement: paso 2, imagen 2 de 2

    • Carefully pull the battery pack from the robot.

    • Remove the batteries from the battery pack.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 9 otros colaboradores

Moira Keahon

Miembro Desde 09/24/14

257 Reputación

3 Guías creadas

Insignias: 15

+ 12 más insignias

Equipo

University of Maine, Team 1-50, Diaz Fall 2014 Miembro de University of Maine, Team 1-50, Diaz Fall 2014

UMAINE-DIAZ-F14S1G50

3 Miembros

6 Guías creadas

11 comentarios

Its a programmer MIP not this kind.

Azariah Trumble - Contestar

Same question here, instructions needed for CODER MIP as it doesn't seem to be a holding a charge.

Gil Acosta - Contestar

does spare battery adapter vailable(not reachargeable)

coolboyz' channel - Contestar

Coder Mip Battery says fully charged - but Coder Mip doesnt turn on?

Sadie - Contestar

Coder MiP one day old - was working - battery says fully charged - but Coder MiP doesn’t turn on? Any suggestions?

Sadie - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 36

Todo El Tiempo: 12,287