Saltar al contenido principal

WowWee CHiP Robot Dog Smart Watch Battery Replacement

Qué necesitas

  1. WowWee CHiP Robot Dog Smart Watch Battery Replacement, Smart Watch Battery: paso 1, imagen 1 de 2 WowWee CHiP Robot Dog Smart Watch Battery Replacement, Smart Watch Battery: paso 1, imagen 2 de 2
    • Place the Smart Watch on its back or side so that the full watch band is visible.

  2. WowWee CHiP Robot Dog Smart Watch Battery Replacement: paso 2, imagen 1 de 1
    • Remove the wrist strap by gently pulling the band off of the plastic pegs on the back of the watch.

  3. WowWee CHiP Robot Dog Smart Watch Battery Replacement: paso 3, imagen 1 de 1
    • Remove the four screws in the back of the watch using a Phillips #0 screwdriver.

  4. WowWee CHiP Robot Dog Smart Watch Battery Replacement: paso 4, imagen 1 de 1
    • Gently pull off the back side of the watch component.

  5. WowWee CHiP Robot Dog Smart Watch Battery Replacement: paso 5, imagen 1 de 1
    • Pull the battery and motherboard component out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

4 comentarios

What batteries does the smart band use?

Yourmajesty100 - Contestar

Can be replaced by one of these and some soldering.

https://www.adafruit.com/product/1317

Alto -

This doesn’t detail sourcing the replacement or un-soldering then soldering the battery.

This is just “WowWee CHiP Robot Dog Smart Watch Battery Inspection” Not Replacement.

Alto - Contestar

But the discussion is under battery replacement

Daniel peters -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 15

Todo El Tiempo: 3,343