Partes

No se requieren partes.

  1. Place the Smart Watch on its back or side so that the full watch band is visible.
    • Place the Smart Watch on its back or side so that the full watch band is visible.

  2. Remove the wrist strap by gently pulling the band off of the plastic pegs on the back of the watch.
    • Remove the wrist strap by gently pulling the band off of the plastic pegs on the back of the watch.

    • Remove the four screws in the back of the watch using a Phillips #0 screwdriver.

    • Gently pull off the back side of the watch component.

    • Pull the battery and motherboard component out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 12

Últimos 30 Días: 68

Todo El Tiempo: 99