Saltar al contenido principal

WowWee CHiP Robot Dog Ear Replacement

Qué necesitas

  1. WowWee CHiP Robot Dog Ear Replacement, Battery: paso 1, imagen 1 de 1
    • Place CHiP on its back so that its stomach is facing you.

  2. WowWee CHiP Robot Dog Ear Replacement: paso 2, imagen 1 de 2 WowWee CHiP Robot Dog Ear Replacement: paso 2, imagen 2 de 2
    • There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing.

  3. WowWee CHiP Robot Dog Ear Replacement: paso 3, imagen 1 de 2 WowWee CHiP Robot Dog Ear Replacement: paso 3, imagen 2 de 2
    • Once the top face of the battery is off, you will see a small rectangular box that the batteries are inside. There are 4 Phillips head screws in the box. Remove all screws with a Phillips head screwdriver.

  4. WowWee CHiP Robot Dog Ear Replacement: paso 4, imagen 1 de 3 WowWee CHiP Robot Dog Ear Replacement: paso 4, imagen 2 de 3 WowWee CHiP Robot Dog Ear Replacement: paso 4, imagen 3 de 3
    • Once the battery is removed from body, the battery should be connected by a red and black wire. There is a red rectangular connector that easily pulls apart. Pull apart the red rectangular connector.

  5. WowWee CHiP Robot Dog Ear Replacement, Ear: paso 5, imagen 1 de 2 WowWee CHiP Robot Dog Ear Replacement, Ear: paso 5, imagen 2 de 2
    • Remove the 4 Phillips screws shown.

  6. WowWee CHiP Robot Dog Ear Replacement: paso 6, imagen 1 de 3 WowWee CHiP Robot Dog Ear Replacement: paso 6, imagen 2 de 3 WowWee CHiP Robot Dog Ear Replacement: paso 6, imagen 3 de 3
    • Pull up top part of toy and remove the connecting wires.

    • Unscrew the 2 Phillips head screws. CHiP should be viewed as seen in the third picture.

  7. WowWee CHiP Robot Dog Ear Replacement: paso 7, imagen 1 de 3 WowWee CHiP Robot Dog Ear Replacement: paso 7, imagen 2 de 3 WowWee CHiP Robot Dog Ear Replacement: paso 7, imagen 3 de 3
    • Remove the 4 Phillips screws to separate the head from the body.

  8. WowWee CHiP Robot Dog Ear Replacement: paso 8, imagen 1 de 2 WowWee CHiP Robot Dog Ear Replacement: paso 8, imagen 2 de 2
    • Remove the 4 Phillips screws on back of the head, and pull off the casing for the back of the head.

  9. WowWee CHiP Robot Dog Ear Replacement: paso 9, imagen 1 de 3 WowWee CHiP Robot Dog Ear Replacement: paso 9, imagen 2 de 3 WowWee CHiP Robot Dog Ear Replacement: paso 9, imagen 3 de 3
    • Unscrew the screw on the ear with a Phillips screwdriver, and pull off the plastic connector. Remove the ear from head.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Un comentario

It’s almost a disassembly, probably quite hard to do. I did disassemble a MiPosaur, but some parts broke off. (!!!)

Michael Deitz - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 17

Todo El Tiempo: 1,471