Partes

No se requieren partes.

  1. Turn the ball so the side with the on/off switch is facing you.
    • Turn the ball so the side with the on/off switch is facing you.

  2. Unscrew the four Phillips #0 screws each located near a corresponding light, and open up the ball.
    • Unscrew the four Phillips #0 screws each located near a corresponding light, and open up the ball.

    • Unplug wire connectors from the circuit.

    • Move battery connector away from the rest of the ball.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 49

Todo El Tiempo: 71