Repara tus cosas Comunidad Tienda

Wolf Gourmet WGTR102S Lighting Component Replacement

Introducción

If the buttons on your toaster don't light up, try replacing the lighting component with this guide.

Qué necesitas

  1. Wolf Gourmet WGTR102S Lighting Component Replacement, Outer Shell: paso 1, imagen 1 de 1

    • Using a wedge, pry off the rubber pieces on the bottom of each foot of the toaster.

    Editar

  2. Wolf Gourmet WGTR102S Lighting Component Replacement: paso 2, imagen 1 de 1

    • Remove the eight 8mm screws on each toaster foot using a Tri-point Y1 screwdriver.

    Editar

  3. Wolf Gourmet WGTR102S Lighting Component Replacement: paso 3, imagen 1 de 1

    • Remove the crumb collector located on the bottom of the toaster.

    Editar

  4. Wolf Gourmet WGTR102S Lighting Component Replacement: paso 4, imagen 1 de 1

    • Remove the three 8mm screws using the Tri-point Y1 screwdriver.

    Editar

  6. Wolf Gourmet WGTR102S Lighting Component Replacement: paso 5, imagen 1 de 1

    • Remove the two 8mm screws on the bottom of the slide lever using a Tri-point Y1 screwdriver.

    • Once the screws are removed, detach the black plastic cover on the bottom of the slide lever.

    Editar

  7. Wolf Gourmet WGTR102S Lighting Component Replacement: paso 6, imagen 1 de 1

    • Remove the final 8mm screw in the slide lever.

    • The lever can now pull away from the entire unit.

    Editar

  8. Wolf Gourmet WGTR102S Lighting Component Replacement: paso 7, imagen 1 de 1

    • Remove toaster's outer shell by lifting straight up.

    • Slowly remove the outer shell. Disconnect ground wire before fully separating the shell and inner components.

    Editar

  9. Wolf Gourmet WGTR102S Lighting Component Replacement: paso 8, imagen 1 de 2 Wolf Gourmet WGTR102S Lighting Component Replacement: paso 8, imagen 2 de 2

    • Disconnect the wire cluster that connects the lights and circuit board by pulling apart the two plastic connectors.

    • Remove the outer shell from the device.

    Editar

  10. Wolf Gourmet WGTR102S Lighting Component Replacement, Lighting Component: paso 9, imagen 1 de 1

    • Remove two 8mm screws securing the lighting component using a Tri-point Y1 screwdriver.

    Editar

  11. Wolf Gourmet WGTR102S Lighting Component Replacement: paso 10, imagen 1 de 1

    • Remove the lighting component from the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Ryan Funchess

Miembro Desde 04/19/18

697 Reputación

5 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Cal Poly, Team S22-G5, Maness Spring 2018 Miembro de Cal Poly, Team S22-G5, Maness Spring 2018

CPSU-MANESS-S18S22G5

4 Miembros

5 Guías creadas

Un comentario

Hi, do you have an idea how to remove the beeping sound? It's annoying, I want to remove it

Thank you

francis - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 232