Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
If the toaster is not responding to the heat dial, try replacing the circuit board with this guide.
Qué necesitas
-
-
Using a wedge, pry off the rubber pieces on the bottom of each foot of the toaster.
-
-
-
-
Remove the two 4mm screws found on each side of the circuit board using a Tri-point Y1 screwdriver.
-
Casi Terminas!
To reassemble your device, follow these instructions in reverse order.
Conclusión
To reassemble your device, follow these instructions in reverse order.