Repara tus cosas Comunidad Tienda

Wolf Gourmet WGBL100S Power Cord Replacement

Introducción

If your power cord is broken and your blender will not turn on, follow these steps to replace it.

Qué necesitas

  1. Wolf Gourmet WGBL100S Power Cord Replacement, Power Cord: paso 1, imagen 1 de 2 Wolf Gourmet WGBL100S Power Cord Replacement, Power Cord: paso 1, imagen 2 de 2

    • With the bottom of the blender facing up, use a Phillips #2 screwdriver to remove the 4, 1/2 inch long screws in the corners of the device.

    • Ensure the blender is off and unplugged before starting.

    Editar

  2. Wolf Gourmet WGBL100S Power Cord Replacement: paso 2, imagen 1 de 2 Wolf Gourmet WGBL100S Power Cord Replacement: paso 2, imagen 2 de 2

    • Using a metal spudger, pry up one side of each of the rubber feet.

    • Note that one side of each foot is glued down; pry up the non-glued side.

    Editar

  3. Wolf Gourmet WGBL100S Power Cord Replacement: paso 3, imagen 1 de 1

    • Using the same Phillips #2 screwdriver, unscrew the 1/2 inch long screw under each of the feet.

    Editar

  4. Wolf Gourmet WGBL100S Power Cord Replacement: paso 4, imagen 1 de 2 Wolf Gourmet WGBL100S Power Cord Replacement: paso 4, imagen 2 de 2

    • Pull off the base and remove the plastic housing underneath.

    Editar

  6. Wolf Gourmet WGBL100S Power Cord Replacement: paso 5, imagen 1 de 2 Wolf Gourmet WGBL100S Power Cord Replacement: paso 5, imagen 2 de 2

    • On the underside of the base, unscrew the three 3/8" long screws on the plastic piece holding the power cord in place using a Phillips #1 screwdriver.

    • Pull the plastic cover off.

    Editar

  7. Wolf Gourmet WGBL100S Power Cord Replacement: paso 6, imagen 1 de 1

    • Using a wire cutter, cut the three wires of the power cord.

    Editar

  8. Wolf Gourmet WGBL100S Power Cord Replacement: paso 7, imagen 1 de 2 Wolf Gourmet WGBL100S Power Cord Replacement: paso 7, imagen 2 de 2

    • Pull the cut power cord through the base.

    • Then thread the replacement cord back through and re-attach the plastic cover.

    Editar

  9. Wolf Gourmet WGBL100S Power Cord Replacement: paso 8, imagen 1 de 3 Wolf Gourmet WGBL100S Power Cord Replacement: paso 8, imagen 2 de 3 Wolf Gourmet WGBL100S Power Cord Replacement: paso 8, imagen 3 de 3

    • Strip about an inch of insulation off of the snipped power cord and your replacement cord.

    • Twist each strand of wires together to keep them neat.

    Editar

  10. Wolf Gourmet WGBL100S Power Cord Replacement: paso 9, imagen 1 de 2 Wolf Gourmet WGBL100S Power Cord Replacement: paso 9, imagen 2 de 2

    • Twist together the wires from the replacement cord to the wires still attached to the blender.

    • Solder the connection if possible.

    Editar

  11. Wolf Gourmet WGBL100S Power Cord Replacement: paso 10, imagen 1 de 2 Wolf Gourmet WGBL100S Power Cord Replacement: paso 10, imagen 2 de 2

    • Wrap all the connections in electrical tape or heat shrink tubing.

    Editar
Conclusión

To reassemble your device, follow steps 1-5 in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Cole Gillespie

Miembro Desde 04/19/18

476 Reputación

2 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team S25-G16, Maness Spring 2018 Miembro de Cal Poly, Team S25-G16, Maness Spring 2018

CPSU-MANESS-S18S25G16

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 228