Saltar al contenido principal

Wolf Gourmet WGBL100S O-ring Replacement

Qué necesitas

  1. Wolf Gourmet WGBL100S O-ring Replacement, Blender Blades: paso 1, imagen 1 de 1
    • Flip over the pitcher to expose the base of the blade assembly.

    • Using the H4.0 Allen key from the 54 bit driver kit, attached to an impact driver, remove the socket head cap screw from the drive coupling.

    • Apply a solvent to remove adhesive if necessary.

  2. Wolf Gourmet WGBL100S O-ring Replacement: paso 2, imagen 1 de 1
    • Using a pair of pliers, pull of the drive shaft coupling.

  3. Wolf Gourmet WGBL100S O-ring Replacement: paso 3, imagen 1 de 2 Wolf Gourmet WGBL100S O-ring Replacement: paso 3, imagen 2 de 2
    • Using a flat head screwdriver and a mallet, bend down the two tabs holding the large nut.

  4. Wolf Gourmet WGBL100S O-ring Replacement: paso 4, imagen 1 de 1
    • Remove the nut using a crescent wrench.

  5. Wolf Gourmet WGBL100S O-ring Replacement: paso 5, imagen 1 de 1
    • Push the blade assembly into the jar.

    • Remove the blades from the device.

    • Be careful not to cut yourself when handling the blades.

  6. Wolf Gourmet WGBL100S O-ring Replacement, O-Ring: paso 6, imagen 1 de 2 Wolf Gourmet WGBL100S O-ring Replacement, O-Ring: paso 6, imagen 2 de 2
    • Use tweezers to pull off the o-ring.

    • Be careful not to cut yourself while handling the blender blades.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Luke Kutz

Miembro Desde 04/19/18

354 Reputación

3 Guías creadas

Equipo

Cal Poly, Team S25-G16, Maness Spring 2018 Miembro de Cal Poly, Team S25-G16, Maness Spring 2018

CPSU-MANESS-S18S25G16

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 246