Teardown of Water Dancing Speaker

Remove 4 screws from rear of speaker

Peel back the rear half of the shell

Remove the Water/Pump Chamber

Remove 2 screws that hold the logic circuit in place

Carefully pull the logic board up, out of the plastic slot

Carefully pull the Lithium Ion Battery out of the plastic slot

Remove the 3 screws holding the speaker

Remove the speaker from the plastic shell

Disconnect the battery connector from the logic board

Disconnect the motor connector from the logic board

Disconnect the speaker connector from the logic board

Disconnect the LED connector from the logic board

Remove the 2 screws holding the motor mount on the water/pump chamber

Remove the motor mount from the water/pump chamber

Remove the 2 screws holding the LED board on the water/pump.

Remove the LED board from the water/pump

Teardown Finished

For Reassembly: Follow Guide in Reverse