Introducción

Use this guide to replace the outer case on your Nintendo Wii U GamePad.

  1. Face the GamePad down and unscrew the two Phillips #00 screws which are attached to the battery cover.
    • Face the GamePad down and unscrew the two Phillips #00 screws which are attached to the battery cover.

    • Lift up and remove the battery cover.

    Agregar Comentario

  2. With your finger on the battery connector, pull downwards toward the base of the GamePad to disconnect it.
    • With your finger on the battery connector, pull downwards toward the base of the GamePad to disconnect it.

    • Pull upwards from the bottom of the battery to release it.

    Agregar Comentario

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Remove the ten 8.9mm Tri-wing Y1 screws hidden underneath square stickers.

    • Lift up the back plate.

    • The back plate is still connected by a cable to the motherboard.

    how do i replace the whole front and back casing?

    enbodylin - Contestar

    • Unplug the connector that connects the back plate to the motherboard.

    • Remove the back plate.

    You don't have to remove just be careful

    Heather Sheppard - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

8 personas más completaron esta guía.

Kim Arre

Miembro Desde 11/01/13

3,156 Reputación

8 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

114 Miembros

7,278 Guías creadas

This is either incomplete or mistitled - it is a currently a back plate replacement guide.

At the conclusion of this how-to/walkthrough, most of the GamePad's hardware is still attached to the front plate, one half of the outer case.

Elijah - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 13

Últimos 30 Días: 85

Todo El Tiempo: 9,242