Repara tus cosas Comunidad Tienda

Wii Balance Board Foot Replacement

Introducción

This guide will demonstrate how to remove and replace the feet on the Wii Balance Board.

Qué necesitas

  1. Wii Balance Board Foot Replacement, Unscrewing the Foot Cover: paso 1, imagen 1 de 1

    • Flip device upside-down so the plastic white board is facing the ground.

    • Locate the four feet in the corners of the Balance Board.

    • Unscrew the three 12.7 mm Phillips screws from each foot cover.

    Editar

  2. Wii Balance Board Foot Replacement, Removing the Foot Cover: paso 2, imagen 1 de 1

    • Remove the gray plastic ring from the actual foot by lifting it up.

    Editar

  4. Wii Balance Board Foot Replacement, Removing the Foot: paso 3, imagen 1 de 1

    • Separate the loose foot from the device by lifting it up.

    Editar

  5. Wii Balance Board Foot Replacement, Removing the Additional Feet: paso 4, imagen 1 de 1

    • Repeat steps two and three on the remaining four feet.

    Editar

    how to completely remove and then put back in would be helpful as that's what the title of this post is…. right?

    Nelda Murray - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 6 otros colaboradores

Cory Olson

Miembro Desde 09/29/14

891 Reputación

4 Guías creadas

Insignias: 16

+ 13 más insignias

Equipo

Cal Poly, Team 13-8, Forte Fall 2014 Miembro de Cal Poly, Team 13-8, Forte Fall 2014

CPSU-FORTE-F14S13G8

5 Miembros

15 Guías creadas

2 comentarios

I am in need of a foot cover. Where can I find one??

Marvin Hopper - Contestar

This manual did not help

nbrown1959.nb - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 10

Ultimos 30 días: 38

Todo El Tiempo: 2,921