Saltar al contenido principal

Introducción

This guide will demonstrate how to remove and replace the feet on the Wii Balance Board.

Partes

No se especificaron partes.

  1. Flip device upside-down so the plastic white board is facing the ground.
    • Flip device upside-down so the plastic white board is facing the ground.

    • Locate the four feet in the corners of the Balance Board.

    • Unscrew the three 12.7 mm Phillips screws from each foot cover.

  2. Remove the gray plastic ring from the actual foot by lifting it up.
    • Remove the gray plastic ring from the actual foot by lifting it up.

  3. Separate the loose foot from the device by lifting it up.
    • Separate the loose foot from the device by lifting it up.

  4. Repeat steps two and three on the remaining four feet.
    • Repeat steps two and three on the remaining four feet.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Cory Olson

Miembro Desde 29/09/14

726 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 13-8, Forte Fall 2014 Miembro de Cal Poly, Team 13-8, Forte Fall 2014

CPSU-FORTE-F14S13G8

5 Miembros

5 Guías creadas

I am in need of a foot cover. Where can I find one??

Marvin Hopper - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 7

Ultimos 30 días: 22

Todo El Tiempo: 1,110