Saltar al contenido principal

Why! WDi7SSD SSD Hard Drive Replacement

Qué necesitas

  1. Why! WDi7SSD SSD Hard Drive Replacement, why! WDi7SSD Opening procedure: paso 1, imagen 1 de 3 Why! WDi7SSD SSD Hard Drive Replacement, why! WDi7SSD Opening procedure: paso 1, imagen 2 de 3 Why! WDi7SSD SSD Hard Drive Replacement, why! WDi7SSD Opening procedure: paso 1, imagen 3 de 3
    • Make sure the computer is disconnected from the power source.

    • Flip the computer over.

    • Remove the six screws with a 2 mm Allen key.

    • Carefully remove the back panel, as well the left and right panel.

  2. Why! WDi7SSD SSD Hard Drive Replacement: paso 2, imagen 1 de 1
    • Now flip up the base panel to which all components are attached.

  3. Why! WDi7SSD SSD Hard Drive Replacement, SSD Hard Drive: paso 3, imagen 1 de 3 Why! WDi7SSD SSD Hard Drive Replacement, SSD Hard Drive: paso 3, imagen 2 de 3 Why! WDi7SSD SSD Hard Drive Replacement, SSD Hard Drive: paso 3, imagen 3 de 3
    • Using a Phillips #2 screwdriver, remove the four screws on the heatsink that cools the processor unit.

    • Remove the heatsink.

  4. Why! WDi7SSD SSD Hard Drive Replacement: paso 4, imagen 1 de 3 Why! WDi7SSD SSD Hard Drive Replacement: paso 4, imagen 2 de 3 Why! WDi7SSD SSD Hard Drive Replacement: paso 4, imagen 3 de 3
    • The SSD is now visible.

    • Now flip the computer over and use the Allen wrench to loosen the 1.5 mm screws fixing the SSD.

  5. Why! WDi7SSD SSD Hard Drive Replacement: paso 5, imagen 1 de 2 Why! WDi7SSD SSD Hard Drive Replacement: paso 5, imagen 2 de 2
    • Disconnect the first cable from the SSD. You must press the lever down to do this.

    • The cable may not loosen easily. In this case, carefully use a little force, but not too much.

    • Pay attention do the orientation when assembling. Otherwise, the SSD and cable can be damaged.

  6. Why! WDi7SSD SSD Hard Drive Replacement: paso 6, imagen 1 de 2 Why! WDi7SSD SSD Hard Drive Replacement: paso 6, imagen 2 de 2
    • Disconnect the second cable from the SSD. You must press the lever down to do this.

    • The cable may not loosen easily. In this case, carefully use a little force, but not too much.

    • Pay attention do the orientation when assembling. Otherwise, the SSD and cable can be damaged.

Conclusión

To reassemble the device, follow the instructions in reverse order.

Un agradecimiento especial a estos traductores:

de en

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Felice Suglia

Miembro Desde 06/15/13

30,908 Reputación

264 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 5

Todo El Tiempo: 128