Repara tus cosas Comunidad Tienda

Wen 2307 Speed Adjustment Assembly Replacement

Introducción

If the device is not changing speed it may be because of a broken speed adjuster.

Qué necesitas

  1. Wen 2307 Speed Adjustment Assembly Replacement, Front Panel: paso 1, imagen 1 de 1

    • Unscrew the locking sleeve.

    Editar

  2. Wen 2307 Speed Adjustment Assembly Replacement: paso 2, imagen 1 de 1

    • Remove the hanging clip.

    Editar

  3. Wen 2307 Speed Adjustment Assembly Replacement: paso 3, imagen 1 de 2 Wen 2307 Speed Adjustment Assembly Replacement: paso 3, imagen 2 de 2

    • Unscrew the six 8mm PH2 screws.

    Editar

  4. Wen 2307 Speed Adjustment Assembly Replacement: paso 4, imagen 1 de 1

    • While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.

    Editar

  6. Wen 2307 Speed Adjustment Assembly Replacement: paso 5, imagen 1 de 1

    • To remove the front panel, pry the device apart while holding the device with the other hand.

    • The front panel should come out easily.

    Editar

  7. Wen 2307 Speed Adjustment Assembly Replacement, Power Cable: paso 6, imagen 1 de 2 Wen 2307 Speed Adjustment Assembly Replacement, Power Cable: paso 6, imagen 2 de 2

    • Identify the screws.

    • Unscrew the two 3mm phillips PH2.

    • Don't forget to put them appart from the ones unscrewed before.

    • Don't forget to put them appart from the ones unscrewed before.

    • Phillips PH2

    • Flathead 2.5mm

    Editar

  8. Wen 2307 Speed Adjustment Assembly Replacement: paso 7, imagen 1 de 1

    • Remove the place boar carefully.

    Editar

  9. Wen 2307 Speed Adjustment Assembly Replacement: paso 8, imagen 1 de 1

    • Pull out the power cable connectors.

    Editar

  10. Wen 2307 Speed Adjustment Assembly Replacement: paso 9, imagen 1 de 1

    • Pull out the cord sleve for the new cable replacement.

    Editar

  11. Wen 2307 Speed Adjustment Assembly Replacement, Speed Adjustment Assembly: paso 10, imagen 1 de 1

    • Remove the connected wiring from the circuit board.

    Editar

  12. Wen 2307 Speed Adjustment Assembly Replacement: paso 11, imagen 1 de 1

    • Remove the single 4mm screw retaining the circuit board.

    Editar

  13. Wen 2307 Speed Adjustment Assembly Replacement: paso 12, imagen 1 de 1

    • Gently pry the circuit board from the back piece.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Dominick Chavez

Miembro Desde 02/08/16

137 Reputación

1 Guía escrita

Insignias: 7

+ 4 más insignias

Equipo

USF Tampa, Team 12-1, Eyestone Spring 2016 Miembro de USF Tampa, Team 12-1, Eyestone Spring 2016

USFT-EYESTONE-S16S12G1

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 8

Todo El Tiempo: 721