Saltar al contenido principal

Wen 2307 Motor Replacement

Qué necesitas

  1. Wen 2307 Motor Replacement, Front Panel: paso 1, imagen 1 de 1
    • Unscrew the locking sleeve.

  2. Wen 2307 Motor Replacement: paso 2, imagen 1 de 1
    • Remove the hanging clip.

  3. Wen 2307 Motor Replacement: paso 3, imagen 1 de 2 Wen 2307 Motor Replacement: paso 3, imagen 2 de 2
    • Unscrew the six 8mm PH2 screws.

  4. Wen 2307 Motor Replacement: paso 4, imagen 1 de 1
    • While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.

  5. Wen 2307 Motor Replacement: paso 5, imagen 1 de 1
    • To remove the front panel, pry the device apart while holding the device with the other hand.

    • The front panel should come out easily.

  6. Wen 2307 Motor Replacement, Speed Adjustment Assembly: paso 6, imagen 1 de 1
    • Remove the connected wiring from the circuit board.

  7. Wen 2307 Motor Replacement: paso 7, imagen 1 de 1
    • Remove the single 4mm screw retaining the circuit board.

  8. Wen 2307 Motor Replacement: paso 8, imagen 1 de 1
    • Gently pry the circuit board from the back piece.

  9. Wen 2307 Motor Replacement, Motor: paso 9, imagen 1 de 1
    • Gently pull motor assembly out of the panel.

  10. Wen 2307 Motor Replacement: paso 10, imagen 1 de 1
    • Motor separates into two pieces.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Joshua Bowery

Miembro Desde 02/08/16

549 Reputación

3 Guías creadas

Equipo

USF Tampa, Team 12-1, Eyestone Spring 2016 Miembro de USF Tampa, Team 12-1, Eyestone Spring 2016

USFT-EYESTONE-S16S12G1

4 Miembros

6 Guías creadas

Un comentario

All very well and good, but it’s impossible to buy the motor parts to replace…

Closetslave 1 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 599