Repara tus cosas Comunidad Tienda

Waring Pro SB30 Back Panel Replacement

Introducción

The back panel located on the underside of the burner and is held in place by multiple screws. Take care when removing the screws as it may require a good amount of force if the panel has never been removed.

Qué necesitas

  1. Waring Pro SB30 Back Panel Replacement, Back Panel: paso 1, imagen 1 de 1

    • Remove the screws on the back panel with the #1 Phillips screwdriver bit.

    • The screws in the rubber legs of the burner do not need to be removed.

    • If the back panel has never been opened before, the screws may be more difficult to unscrew.

    Editar

  3. Waring Pro SB30 Back Panel Replacement: paso 2, imagen 1 de 2 Waring Pro SB30 Back Panel Replacement: paso 2, imagen 2 de 2

    • Using a wrench, remove the bolt from the center of the back panel.

    Editar

  4. Waring Pro SB30 Back Panel Replacement: paso 3, imagen 1 de 1

    • The back panel can now be easily lifted off.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 2 otros colaboradores

Sun Fai Lau

Miembro Desde 09/22/14

588 Reputación

5 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

USF Tampa, Team 10-7, Brown Fall 2014 Miembro de USF Tampa, Team 10-7, Brown Fall 2014

USFT-BROWN-F14S10G7

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 287