Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Vivitar DVR 781HD Motherboard Replacement

Introducción

This guide provides the instructions needed to remove the motherboard from the 781HD DVR camcorder.

Qué necesitas

  1. Vivitar DVR 781HD Motherboard Replacement, Front Case: paso 1, imagen 1 de 3 Vivitar DVR 781HD Motherboard Replacement, Front Case: paso 1, imagen 2 de 3 Vivitar DVR 781HD Motherboard Replacement, Front Case: paso 1, imagen 3 de 3

    • Begin with the camcorder lens up on a clear working surface.

    • Remove the two 4mm Phillips #1 screws holding the switch plate in place. Rotate the device 180 degrees and repeat for the screws on the opposite side.

    Traducir

  2. Vivitar DVR 781HD Motherboard Replacement: paso 2, imagen 1 de 1

    • Slide the plastic opening tool into the seam between the front and back sections of the case and apply a small amount of force to pop the case open.

    Traducir

  4. Vivitar DVR 781HD Motherboard Replacement: paso 3, imagen 1 de 3 Vivitar DVR 781HD Motherboard Replacement: paso 3, imagen 2 de 3 Vivitar DVR 781HD Motherboard Replacement: paso 3, imagen 3 de 3

    • Move the plastic opening tool around the seam and apply force at each step to separate the front plate from the back plate and motherboard.

    • The battery is held to the front half of the case with double-sided tape. Peel it up with a finger, being careful not to damage the battery.

    Traducir

  5. Vivitar DVR 781HD Motherboard Replacement, Motherboard: paso 4, imagen 1 de 2 Vivitar DVR 781HD Motherboard Replacement, Motherboard: paso 4, imagen 2 de 2

    • Using a P1 screwdriver, remove the 4mm screws holding the motherboard into the case.

    Traducir

  6. Vivitar DVR 781HD Motherboard Replacement: paso 5, imagen 1 de 1

    • Gently lift the motherboard, handling it by the edges.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Nathan McDaniel

Miembro Desde 02/13/16

592 Reputación

3 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

IUPUI, Team 54-6, Wilson Spring 2016 Miembro de IUPUI, Team 54-6, Wilson Spring 2016

IUPUI-WILSON-S16S54G6

3 Miembros

10 Guías creadas

3 comentarios

It says no parts required, but it is instructions to replace the motherboard.

There is nothing about getting another motherboard, and how much.

Heki Kahni - Contestar

How do you get a motherboard?

Rdam Russell - Contestar

Where do we get one?

bikerbarbie29 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 1,411