Repara tus cosas Comunidad Tienda

Vivitar DVR 781HD Front Case Replacement

Qué necesitas

  1. Vivitar DVR 781HD Front Case Replacement, Front Case: paso 1, imagen 1 de 3 Vivitar DVR 781HD Front Case Replacement, Front Case: paso 1, imagen 2 de 3 Vivitar DVR 781HD Front Case Replacement, Front Case: paso 1, imagen 3 de 3

    • Begin with the camcorder lens up on a clear working surface.

    • Remove the two 4mm Phillips #1 screws holding the switch plate in place. Rotate the device 180 degrees and repeat for the screws on the opposite side.

    Editar

  3. Vivitar DVR 781HD Front Case Replacement: paso 2, imagen 1 de 1

    • Slide the plastic opening tool into the seam between the front and back sections of the case and apply a small amount of force to pop the case open.

    Editar

  4. Vivitar DVR 781HD Front Case Replacement: paso 3, imagen 1 de 3 Vivitar DVR 781HD Front Case Replacement: paso 3, imagen 2 de 3 Vivitar DVR 781HD Front Case Replacement: paso 3, imagen 3 de 3

    • Move the plastic opening tool around the seam and apply force at each step to separate the front plate from the back plate and motherboard.

    • The battery is held to the front half of the case with double-sided tape. Peel it up with a finger, being careful not to damage the battery.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Jordan Baum

Miembro Desde 02/13/16

355 Reputación

2 Guías creadas

Insignias: 17

+ 14 más insignias

Equipo

IUPUI, Team 54-6, Wilson Spring 2016 Miembro de IUPUI, Team 54-6, Wilson Spring 2016

IUPUI-WILSON-S16S54G6

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 276