Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Wedge a plastic opening tool into the edges of the tablet to pry it open.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #000 screwdriver to remove the two 3.6mm screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully remove the ribbon cable from the black tab.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #000 screwdriver to remove the 3.6mm screw.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Plastic Cards$2.99-
Wedge a plastic card underneath the battery to remove it.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully remove the ribbon cable from the black tab.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift to remove the battery and motherboard from the tablet.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #000 screwdriver to remove the three 2.5mm screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Wedge a metal spudger underneath the LCD to remove it.
-
Replace the LCD.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.