Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Complete the following guide to replace a dead or failing battery in the Visual Land Prestige Elite 7Q.

  1. At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver. At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.
    • At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.

  2. Wedge a plastic opening tool into the edges of the tablet to pry it open. Wedge a plastic opening tool into the edges of the tablet to pry it open.
    • Wedge a plastic opening tool into the edges of the tablet to pry it open.

  3. Peel off the yellow tape holding down the battery. Peel off the yellow tape holding down the battery.
    • Peel off the yellow tape holding down the battery.

  4. Use a plastic card to loosen the battery from the tablet. Note that it will be sticky underneath the battery. Use a plastic card to loosen the battery from the tablet. Note that it will be sticky underneath the battery.
    • Use a plastic card to loosen the battery from the tablet. Note that it will be sticky underneath the battery.

  5. Soldering iron gets hot.  For information on how to use a soldering iron, click here. Use a soldering iron to detach the battery wires from the motherboard. Replace the battery.
    • Soldering iron gets hot. For information on how to use a soldering iron, click here.

    • Use a soldering iron to detach the battery wires from the motherboard.

    • Replace the battery.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

UC Davis, Team 2-1, Oliver Fall 2016 Miembro de UC Davis, Team 2-1, Oliver Fall 2016

UCD-OLIVER-F16S2G1

5 Miembros

12 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 6

Todo El Tiempo: 906