Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

  1. Inserir instruções aqui. Inserir instruções aqui. Inserir instruções aqui.
    • Inserir instruções aqui.

  2. Inserir instruções aqui. Inserir instruções aqui. Inserir instruções aqui.
    • Inserir instruções aqui.

  3. Inserir instruções aqui. Inserir instruções aqui. Inserir instruções aqui.
    • Inserir instruções aqui.

  4. SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación

    SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación
  5. Inserir instruções aqui. Inserir instruções aqui. Inserir instruções aqui.
    • Inserir instruções aqui.

  6. 1 - Remove 2 screws on lense board. 2 - On second photo "cant see" the screws but remove 3, then gently in the circle remove recording plastic light. 3 - Remove screw from Microphone so you can remove metal protection to get out lens board.
    • 1 - Remove 2 screws on lense board.

    • 2 - On second photo "cant see" the screws but remove 3, then gently in the circle remove recording plastic light.

    • 3 - Remove screw from Microphone so you can remove metal protection to get out lens board.

  7. 1 - The lense can be rotated manualy untyl you get it on focus. 2 - With camera open insert batery, hold it by hand to make contact.
    • 1 - The lense can be rotated manualy untyl you get it on focus.

    • 2 - With camera open insert batery, hold it by hand to make contact.

    • 3 - Click power buton and start the camera.

    • 4 - Look at screen and with other hand focus the lense.

    • Insert batery, hold power boton. Check screen and focus lense manualy. Enjoy !

  8. After you tune the "lens" you should get some Hot Glue on the lens, cause with time it will get out of place. I have to open my camera two times for this reason. After you tune the "lens" you should get some Hot Glue on the lens, cause with time it will get out of place. I have to open my camera two times for this reason.
    • After you tune the "lens" you should get some Hot Glue on the lens, cause with time it will get out of place. I have to open my camera two times for this reason.

  9. With time the lens move back from original position. It start to make contact with the little metal base where the screw goes. With a metal file I remove some of the metal base of screw.
    • With time the lens move back from original position.

    • It start to make contact with the little metal base where the screw goes.

    • With a metal file I remove some of the metal base of screw.

    • Before assembly the camera put the batery in and try it!.

    • Check if the screen works.

Conclusión

Para remontagem de seu dispositivo, siga estas instruções na ordem inversa.

2 personas más completaron esta guía.

Cafony

Miembro Desde 17/02/15

275 Reputación

3 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 5

Todo El Tiempo: 348