Saltar al contenido principal

Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 2 : paso 1, imagen 2 de 2
    • Remove the back panel by first pressing and holding the gray button on the back. While doing that also press and slide the panel down and off.

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 1
    • Carefully remove the battery from the phone by prying the battery from the top.

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 1
    • Remove the rubber plugs from the screw holes around the screen with the opening tool.

  4. Este paso está sin traducir. Ayuda a traducirlo

    : paso 4, imagen 1 de 1
    • Remove the four screws from around the phone's screen with a Phillips screwdriver.

  5. Este paso está sin traducir. Ayuda a traducirlo

    : paso 5, imagen 1 de 1
    • Pry the top cover off the phone with a plastic opening tool.

  6. Este paso está sin traducir. Ayuda a traducirlo

    : paso 6, imagen 1 de 1
    • Remove the screen assembly from the phone.

  7. Este paso está sin traducir. Ayuda a traducirlo

    : paso 7, imagen 1 de 1
    • Pry the circuit board off of the screen with the opening tool.

Linea de Meta

Corey Ryman

Miembro Desde 10/14/11

255 Reputación

4 Guías creadas

Equipo

James Madison, Team 2-4, Allen Fall 2011 Miembro de James Madison, Team 2-4, Allen Fall 2011

JMU-ALLEN-F11S2G4

3 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 10

Ultimos 30 días: 15

Todo El Tiempo: 1,106