Saltar al contenido principal

Venturer CR20 Power Cord Replacement

Qué necesitas

  1. Venturer CR20 Power Cord Replacement, Front Screen: paso 1, imagen 1 de 1
    • On the bottom of the clock locate and unscrew the single 2mm Phillips screw from bottom of the clock.

  2. Venturer CR20 Power Cord Replacement: paso 2, imagen 1 de 2 Venturer CR20 Power Cord Replacement: paso 2, imagen 2 de 2
    • Using a moderate amount of force, position the screwdriver in the crack between the front screen and the main body of the clock (as shown) and push the screen away from the main body of the clock.

  3. Venturer CR20 Power Cord Replacement, Power Cord: paso 3, imagen 1 de 2 Venturer CR20 Power Cord Replacement, Power Cord: paso 3, imagen 2 de 2
    • Get a firm grip on the outside of the clock and a firm grip on the hardware on the inside of the the clock like so and pull the hardware out from the outside of the clock.

  4. Venturer CR20 Power Cord Replacement: paso 4, imagen 1 de 3 Venturer CR20 Power Cord Replacement: paso 4, imagen 2 de 3 Venturer CR20 Power Cord Replacement: paso 4, imagen 3 de 3
    • Using your fingers, pull the power cord connector, outlined in the picture with a red rectangle straight up to disconnect from the alarm clock.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Robert Myers

Miembro Desde 01/11/13

54 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 5-15, Forte Winter 2013 Miembro de Cal Poly, Team 5-15, Forte Winter 2013

CPSU-FORTE-W13S5G15

5 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 9

Todo El Tiempo: 411