Introducción

This guide will teach the user how to replace the fan.

  1. Flip laptop over so that "Service TAG" is shown at the top left corner.
    • Flip laptop over so that "Service TAG" is shown at the top left corner.

    Agregar Comentario

  2. Remove highlighted screws from back of laptop.
    • Remove highlighted screws from back of laptop.

    Agregar Comentario

    • Remove screws from panels at bottom right hand side.

    Agregar Comentario

    • Remove two panels at bottom right hand corner by sliding in direction of arrows shown

    Agregar Comentario

    • Remove screws underneath removed panels.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Remove Hard drive from computer.

    Agregar Comentario

    • Remove battery by pressing inwards on both tabs.

    Agregar Comentario

    • Remove cover at top left of laptop by pulling outwards.

    Agregar Comentario

    • Remove backplate of laptop by pulling outward.

    Agregar Comentario

    • Gently remove the connector for the wire running over the fan by lifting the tab on top up with your fingernail and sliding it out.

    Agregar Comentario

    • Unscrew the four screws which hold in the fan.

    Agregar Comentario

    • Lift out the fan and place it to the side.

    • DO NOT FORCEFULLY PULL THE FAN AWAY there is still a wire attaching it to the circuit board and you don't want to damage the circuit board.

    Agregar Comentario

    • Remove the connection by gently pull the remaining connection up from where it is attached.

    Agregar Comentario

    • Replace the old fan with the new one.

    • Make sure that fan being used to replace is compatible with computer.

    • Sony no-longer has a list of compatible fans, so this may be difficult if not impossible.

    • Another option to making it quieter it is to blow off the accumulated dust either by blowing on it, or more effectively by using an air hose.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 224