VTech Safe And Sound DM221 Buttons Replacement - Guía de reparación iFixit

Introducción

Are the letters on your buttons fading? Use this guide to replace the buttons on your baby monitor.

Qué necesitas

Paso 1 Buttons

VTech Safe And Sound DM221 Buttons Replacement, Buttons: paso 1, imagen 1 de 1

Remove the battery cover by sliding it down.

Paso 2

VTech Safe And Sound DM221 Buttons Replacement: paso 2, imagen 1 de 1

Firmly grasp the battery and pull to disconnect the battery from its connector.

Paso 3

VTech Safe And Sound DM221 Buttons Replacement: paso 3, imagen 1 de 1

Using a Phillips #00 screwdriver, unscrew the two 5.0 mm screws located at the bottom of the monitor inside of the device.

Paso 4

VTech Safe And Sound DM221 Buttons Replacement: paso 4, imagen 1 de 1

Using a plastic opening tool, pry apart the front part of the device from the back. There are many access points, but the best spot to insert the spudger is around the "TALK" button.
Avoid using the metal spudger. When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

Paso 5

VTech Safe And Sound DM221 Buttons Replacement: paso 5, imagen 1 de 2

VTech Safe And Sound DM221 Buttons Replacement: paso 5, imagen 2 de 2

Remove the buttons from the front part of the device.
Tip: The buttons on the front of the device (“POWER,” “SELECT,” “MENU,” “VOLUME”) are all connected as one unit. Pull them out carefully.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Krystal

Miembro Desde 10/01/15

600 Reputación

5 Guías creadas

+ 10 más insignias

Equipo

USF Tampa, Team 1-5, Leahy Fall 2015 Miembro de USF Tampa, Team 1-5, Leahy Fall 2015

USFT-LEAHY-F15S1G5

4 Miembros

5 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 5

Todo El Tiempo: 360