Saltar al contenido principal

Introducción

This guide will show how to replace the speaker for the 2014 VTech Record and Learn KidiStudio if it stops working.

  1. Unscrew 11 PH2 screws (7 mm). Remove the black plastic backing.
    • Unscrew 11 PH2 screws (7 mm).

    • Remove the black plastic backing.

    • Remove the batteries from the toy before beginning replacement of the speaker.

  2. Skip the upgrade.

    Descuento de $10 en tu factura de $50 con
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  3. In the top right corner inside the device,  unscrew the 2 PH2 screws (5 mm) holding the speaker in place.
    • In the top right corner inside the device, unscrew the 2 PH2 screws (5 mm) holding the speaker in place.

  4. Desolder the electrical connections from the speaker and replace part.
    • Desolder the electrical connections from the speaker and replace part.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Shaina Carbonel

Miembro Desde 01/02/16

537 Reputación

5 Guías creadas

Equipo

UW Tacoma, Team 1-1, Rose Winter 2016 Miembro de UW Tacoma, Team 1-1, Rose Winter 2016

UWT-ROSE-W16S1G1

5 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 121