Introducción
This guide shows users how to replace the screen. By first taking the device apart until they can reach the screen so that they can replace it.
Qué necesitas
-
-
Remove the three 4.0 mm Philips J0 screws holding the "L" shaped brackets in place.
-
-
-
-
Peel the ribbon wire off of the circuit board. Now the screen should be free to remove.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.