Repara tus cosas Comunidad Tienda

VTech Kidizoom Smartwatch DX2 Wristband Replacement

Introducción

If your wristband has visible damage, is worn, torn or broken the following guide will help you repair your problem.

Qué necesitas

  1. VTech Kidizoom Smartwatch DX2 Wristband Replacement, Wristband: paso 1, imagen 1 de 1

    • Begin by placing the watch on its side.

    Traducir

  2. VTech Kidizoom Smartwatch DX2 Wristband Replacement: paso 2, imagen 1 de 1

    • Next, use the flat end of the spudger to wedge between the small-headed pin (located on the band closest to the watch) to pull the pin up through the other side.

    Traducir

  4. VTech Kidizoom Smartwatch DX2 Wristband Replacement: paso 3, imagen 1 de 1

    • Pull the pin out, however not fully, feeling slight resistance is normal.

    Traducir

  5. VTech Kidizoom Smartwatch DX2 Wristband Replacement: paso 4, imagen 1 de 1

    • Finally, pull the wristband off. Repeat on the opposite side of the watch if necessary.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Sydney

Miembro Desde 10/25/18

344 Reputación

2 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

UMass Dartmouth, Team S3-G5, Peak Fall 2018 Miembro de UMass Dartmouth, Team S3-G5, Peak Fall 2018

UMASSD-PEAK-F18S3G5

4 Miembros

7 Guías creadas

Un comentario

My Vtech DX2 had a split pin. One side of the pin was the long side and the other very very short. So look out for that. Thanks for this tutorial, was very helpful.

Ryan Laurel - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 11

Ultimos 30 días: 38

Todo El Tiempo: 7,226