Repara tus cosas Comunidad Tienda

VTech Kidizoom Smartwatch DX2 Faceplate Replacement

Introducción

If the faceplate to your watch is cracked or simply needs a clean, the following guide will show how to remove and replace this piece.

Qué necesitas

  1. VTech Kidizoom Smartwatch DX2 Faceplate Replacement, Faceplate: paso 1, imagen 1 de 1

    • In order to remove the faceplate you must start by placing the watch screen upwards.

    Traducir

  3. VTech Kidizoom Smartwatch DX2 Faceplate Replacement: paso 2, imagen 1 de 1

    • Use iFixit’s opening tool, another similar tool, or simply use your fingernail to gently pry open the faceplate away from the screen starting from an edge.

    • You may hear a popping sound, but this is normal.

    Traducir

  4. VTech Kidizoom Smartwatch DX2 Faceplate Replacement: paso 3, imagen 1 de 1

    • Once successful, pull the remaining faceplate off from the watch.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 2 otros colaboradores

Jessica Richard

Miembro Desde 10/25/18

512 Reputación

4 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

UMass Dartmouth, Team S3-G5, Peak Fall 2018 Miembro de UMass Dartmouth, Team S3-G5, Peak Fall 2018

UMASSD-PEAK-F18S3G5

4 Miembros

7 Guías creadas

4 comentarios

Where can I find a faceplate?

Sammi Schummer - Contestar

Where can you buy a replacement face plate?

Natalie - Contestar

This doesn't remove the faceplate, just the decorative bezel around the screen. I'm looking for disassembly instructions to open up the screen as my son wore his I to the pool (immediately after being told not to! Kids…)

Jack Wesselo - Contestar

Where can I get a replacement faceplate please

Steph Crowe - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 10

Todo El Tiempo: 2,516