Introducción

The Brother HL-5240 printer comes standard with 16 megabytes of memory. The following steps can be followed to add more memory. Up to 528 MB of ram can be added.

  1. Flip the power switch to the off position by pressing the side of the button with an "O" symbol.
    • Flip the power switch to the off position by pressing the side of the button with an "O" symbol.

    • Unplug the printer's cord from the wall socket.

    Agregar Comentario

  2. Locate the small removable panel on the left side of the printer.
    • Locate the small removable panel on the left side of the printer.

    • Press the tab at the top of the panel.

    • Pull the panel open.

    Agregar Comentario

    • Pull the old RAM out of its slot and insert the new RAM in its place.

    Agregar Comentario

Linea de Meta

Una persona más ha completado esta guía.

Equipo

Cal Poly, Team 4-14, Forte Winter 2010 Miembro de Cal Poly, Team 4-14, Forte Winter 2010

CPSU-FORTE-W10S4G14

5 Miembros

5 Guías creadas

I want a way to treat the blurry picture

mahmoud22365 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 3

Últimos 30 Días: 10

Todo El Tiempo: 3,101