Saltar al contenido principal

Unnecto Drone M Digitizer Replacement

Qué necesitas

  1. Unnecto Drone M Digitizer Replacement, Unnecto Drone M Disassembly: paso 1, imagen 1 de 2 Unnecto Drone M Digitizer Replacement, Unnecto Drone M Disassembly: paso 1, imagen 2 de 2
    • Place the phone facedown on a cleared work area

    • Remove the back case by applying moderate force to the indentation in the lower left corner of the case.

  2. Unnecto Drone M Digitizer Replacement: paso 2, imagen 1 de 1
    • Grip the top right corner of the battery.

    • Remove the battery by pulling it outwards.

  3. Unnecto Drone M Digitizer Replacement: paso 3, imagen 1 de 1
    • Remove the four screws on the back of the phone using a Philips 000 screwdriver

  4. Unnecto Drone M Digitizer Replacement: paso 4, imagen 1 de 1
    • Separate the frame evenly using a plastic opening tool.

    • Be careful, as the frame is thin and can break easily.

  5. Unnecto Drone M Digitizer Replacement: paso 5, imagen 1 de 2 Unnecto Drone M Digitizer Replacement: paso 5, imagen 2 de 2
    • Use a Phillips #000 screwdriver to remove the four screws that secure the motherboard.

  6. Unnecto Drone M Digitizer Replacement: paso 6, imagen 1 de 1
    • Disconnect the ribbon cable from the motherboard using rounded, spade-tipped tweezers.

  7. Unnecto Drone M Digitizer Replacement: paso 7, imagen 1 de 1
    • Peel the white circuit on left side of the frame by inserting fine-tipped tweezers between it and the frame.

    • The white circuit is flimsy and securely glued to the frame.

  8. Unnecto Drone M Digitizer Replacement: paso 8, imagen 1 de 2 Unnecto Drone M Digitizer Replacement: paso 8, imagen 2 de 2
    • Set aside the circuit board from the screen protector.

  9. Unnecto Drone M Digitizer Replacement, Digitizer: paso 9, imagen 1 de 2 Unnecto Drone M Digitizer Replacement, Digitizer: paso 9, imagen 2 de 2
    • Replace the old plastic screen with the new one.

    • Reassemble the phone by following the steps in reverse order.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 252