Repara tus cosas Comunidad Tienda

Uniden UTAB71 Speaker Replacement

Introducción

This guide will explain how to replace the internal speaker of a UTAB71.

Qué necesitas

  1. Uniden UTAB71 Speaker Replacement, Speaker: paso 1, imagen 1 de 2 Uniden UTAB71 Speaker Replacement, Speaker: paso 1, imagen 2 de 2

    • Use a plastic pry tool to undo the clips that attach the two halves of the tablet.

    • Make sure to be gentle with the pry tool and work your way around the edges of the tablet slowly.

    • Make sure the tablet is powered off before prying open.

    • There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.

    Editar

  3. Uniden UTAB71 Speaker Replacement: paso 2, imagen 1 de 1

    • Use a soldering tool to disconnect the speaker wires off the motherboard.

    • If you have no experience in soldering, please follow this guide

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Ryan Jewell

Miembro Desde 10/20/16

422 Reputación

4 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

UMass Dartmouth, Team 5-4, Martin Fall 2016 Miembro de UMass Dartmouth, Team 5-4, Martin Fall 2016

UMASSD-MARTIN-F16S5G4

3 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 4

Todo El Tiempo: 157