Saltar al contenido principal

Uniden UTAB71 Camera Replacement

Qué necesitas

  1. Uniden UTAB71 Camera Replacement, Camera: paso 1, imagen 1 de 2 Uniden UTAB71 Camera Replacement, Camera: paso 1, imagen 2 de 2
    • Use a plastic pry tool to separate the two halves of the tablet.

    • Make sure to be gentle with the pry tool and work your way around the edges of the tablet slowly.

    • Make sure the tablet is powered off before prying open.

    • There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.

  2. Uniden UTAB71 Camera Replacement: paso 2, imagen 1 de 2 Uniden UTAB71 Camera Replacement: paso 2, imagen 2 de 2
    • Use a credit card to lift the battery off the back of the tablet.

    • Do not put any pressure on the motherboard or any other internal components.

    • The battery is glued onto the back of the tablet so make sure to apply as much pressure as needed

  3. Uniden UTAB71 Camera Replacement: paso 3, imagen 1 de 1
    • Undo the clips off the power ribbon connecting the camera to the motherboard using the blue pry tool.

  4. Uniden UTAB71 Camera Replacement: paso 4, imagen 1 de 3 Uniden UTAB71 Camera Replacement: paso 4, imagen 2 de 3 Uniden UTAB71 Camera Replacement: paso 4, imagen 3 de 3
    • Use the pry tool to remove the yellow tape from the power ribbon connected to the camera.

    • Place the plastic pry tool under the camera component and lift it off the tablet.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ryan Jewell

Miembro Desde 10/20/16

422 Reputación

4 Guías creadas

Equipo

UMass Dartmouth, Team 5-4, Martin Fall 2016 Miembro de UMass Dartmouth, Team 5-4, Martin Fall 2016

UMASSD-MARTIN-F16S5G4

3 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 3

Todo El Tiempo: 166