Saltar al contenido principal

Uniden UTAB71 Battery Replacement

Qué necesitas

  1. Uniden UTAB71 Battery Replacement, Battery: paso 1, imagen 1 de 2 Uniden UTAB71 Battery Replacement, Battery: paso 1, imagen 2 de 2
    • Use a plastic opening tool to undo the clips that attach the two halves of the tablet.

    • Be gentle with the pry tool and work your way around the edges of the tablet slowly.

    • Make sure the tablet is powered off before prying open.

    • There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.

  2. Uniden UTAB71 Battery Replacement: paso 2, imagen 1 de 1
    • Lift off the tape that holds the speaker wires to the battery

    • Leave the tape off to the side

  3. Uniden UTAB71 Battery Replacement: paso 3, imagen 1 de 1
    • Use a soldering tool to disconnect the two wires (red and black) that connect the battery to the motherboard

    • Note the placement of each colored wire in the motherboard

    • If you have no experience in soldering, please follow this guide

  4. Uniden UTAB71 Battery Replacement: paso 4, imagen 1 de 2 Uniden UTAB71 Battery Replacement: paso 4, imagen 2 de 2
    Herramienta utilizada en este paso:
    iOpener
    $12.99
    Comprar
    • Use a credit card to lift the battery off the back of the tablet

    • Do not put any pressure on the motherboard or any other internal components.

    • The battery attached to the back panel with adhesive. You may need to use a heated iOpener to loosen the adhesive and remove the battery.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ryan Jewell

Miembro Desde 10/20/16

422 Reputación

4 Guías creadas

Equipo

UMass Dartmouth, Team 5-4, Martin Fall 2016 Miembro de UMass Dartmouth, Team 5-4, Martin Fall 2016

UMASSD-MARTIN-F16S5G4

3 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 4

Ultimos 30 días: 5

Todo El Tiempo: 342