Saltar al contenido principal

UTStarcom XV6700 Camera Replacement

Qué necesitas

  1. UTStarcom XV6700 Camera Replacement, Battery: paso 1, imagen 1 de 1
    • Press the on/off button on the top to power the phone off.

  2. UTStarcom XV6700 Camera Replacement: paso 2, imagen 1 de 1
    • Remove the battery cover by pressing and sliding the cover down and off of the phone.

  3. UTStarcom XV6700 Camera Replacement: paso 3, imagen 1 de 3 UTStarcom XV6700 Camera Replacement: paso 3, imagen 2 de 3 UTStarcom XV6700 Camera Replacement: paso 3, imagen 3 de 3
    • Pull the battery removal tab and lift the battery out of the phone.

    • If the battery removal tab is missing, place a spudger on the opposite side of the highlighted connector and pry the battery up.

  4. UTStarcom XV6700 Camera Replacement, Camera: paso 4, imagen 1 de 1
    • Remove the two 4.0-mm #000 Phillips screws at the top of the battery compartment. Tweezers may be useful to remove the screws.

  5. UTStarcom XV6700 Camera Replacement: paso 5, imagen 1 de 2 UTStarcom XV6700 Camera Replacement: paso 5, imagen 2 de 2
    • Use firm pressure to carefully pry off the cover with your fingers.

  6. UTStarcom XV6700 Camera Replacement: paso 6, imagen 1 de 1
    • Remove the 4.0-mm #00 Phillips screw securing the camera flash circuit board. The board is still connected by a connector on the bottom of the board.

  7. UTStarcom XV6700 Camera Replacement: paso 7, imagen 1 de 1
    • Gently pry off the camera flash circuit board with the spudger.

  8. UTStarcom XV6700 Camera Replacement: paso 8, imagen 1 de 1
    • Gently pry off the camera with the spudger.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jesse Walker

Miembro Desde 06/04/13

201 Reputación

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 9

Todo El Tiempo: 184