Introducción

Follow this guide to properly replace the keyboard.

Push the highlighted button in the direction in which the antenna is pointing. The battery will release and pop up.
  • Push the highlighted button in the direction in which the antenna is pointing. The battery will release and pop up.

Agregar Comentario

Remove the battery.
  • Remove the battery.

Agregar Comentario

Identify the antenna. It is the extendable plastic component pictured here.
  • Identify the antenna. It is the extendable plastic component pictured here.

Agregar Comentario

Twist the base in a counter-clockwise motion to unscrew the antenna.
  • Twist the base in a counter-clockwise motion to unscrew the antenna.

Agregar Comentario

The antenna should slide right out of the phone when finished. The antenna should slide right out of the phone when finished.
  • The antenna should slide right out of the phone when finished.

Agregar Comentario

Remove the small rubber grommet using a plastic opening tool as shown.
  • Remove the small rubber grommet using a plastic opening tool as shown.

Agregar Comentario

Unscrew all five of the highlighted screws using a Phillips #00 Screwdriver.
  • Unscrew all five of the highlighted screws using a Phillips #00 Screwdriver.

Agregar Comentario

Use a plastic opening tool to separate the two pieces that form the outer case of the phone.
  • Use a plastic opening tool to separate the two pieces that form the outer case of the phone.

  • Caution: prying the two pieces apart may be difficult.

Agregar Comentario

Remove the posterior piece of the outer case.
  • Remove the posterior piece of the outer case.

Agregar Comentario

Remove the speaker using a plastic opening tool.
  • Remove the speaker using a plastic opening tool.

Agregar Comentario

Remove the wire attached to the speaker from the logic board using tweezers. Remove the wire attached to the speaker from the logic board using tweezers.
  • Remove the wire attached to the speaker from the logic board using tweezers.

Agregar Comentario

Detach the highlighted piece from the logic board using a plastic opening tool.
  • Detach the highlighted piece from the logic board using a plastic opening tool.

Agregar Comentario

Remove the logic board from the anterior piece of the outer case using the plastic opening tool. Remove the logic board from the anterior piece of the outer case using the plastic opening tool.
  • Remove the logic board from the anterior piece of the outer case using the plastic opening tool.

Agregar Comentario

Remove the keyboard.
  • Remove the keyboard.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Bryon Hazlewood

Miembro Desde 03/10/12

1 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 24-26, Regan Fall 2012 Miembro de Cal Poly, Team 24-26, Regan Fall 2012

CPSU-REGAN-F12S24G26

4 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 265